WAN rules

[RRD]

Hello,

I have a SD-WAN setup, wan1 with isp1, wan2 with isp2.

For specific computers on my network I would like to specify the wan port.

Example:

Computer1 (10.0.0.5) only can use wan1

Computer2 (10.0.0.6) only can use wan2.

I've searched on the fortios documentation how to do it but I can't find it.

Can you please help me or give me some direction how to proceed?

[Dave_Hall]

SD-WAN rules should be listed under Network.

[Fullmoon]

if you're not working with SDWAN feature you can work with Policy Based Route (PBR), if SDWAN feature is enabled you can follow what Dave Hall replied.

[RRD]

Thank you both.

I've done like Dave Hall said.

It only allows me to choose interface preference (wan1 or wan2). It is not exactly what I was looking for, because if wan1 is the preference and goes down, it will use the wan2 anyway.

[Fullmoon]

Please take a look on this.

https://help.fortinet.com...rnet%20connections.htm