Hello good morning a question, if I have a site to site VPN and my main segment is the 10.20.0.0/16 and my branches that connect is the 10.30.0.0/24, how can I do it so that all the branches can see one in particular the 10.30.14.1
I thank you for the help
BEST REGARDS
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi
Kindly follow the below article for your reqiremnet.
-
It is not clear what the issue is based on the information provided.
Are you trying to say you have '10.30.0.0/24' located on each of your branches, and they overlap with other branches?
You want to allow your other branches to access '10.30.14.1' on one specific branch?
This should be possible if you use a VIP to map the '10.30.14.1' to a different IP, then use that as the IP to contact the server.
See more details here: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-an-IPsec-tunnel-with-Over...
Or, just want to know how to route a branch to another branch in hub-and-spoke topology?
If so you need to solve:
1. routing
2. phase2 network selectors
3. policies
at all FGTs on the path.
Toshi
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.