Hi All,
Hope you can give some light on the following issue which I'm facing with some fortigates, we have some Fortigates 101F, 100F, 60F and 40F, where after update to OS 7.4.1 we are not able to select VoIP profile on firewall rules, before update it was working fine and VoIP service was ok. This is only happeing on 60F and 40F fortigates, on 100F and 101F we are capable to still using VoIP profile on firewall profiles (this is being used on the IPSEC rules created)
These are the settings we have on fortigates for VoIP:
config system settings
set sip-expectation enable
set sip-nat-trace disable
set h323-direct-model enable
set default-voip-alg-mode kernel-helper-based
set gui-implicit-policy disable
set gui-voip-profile enable
Currently VoIP service is not operational between remote office due to this, traffic is passing on tunnels but SIP sessions looking not be linked as expected.
Can someone can let kmoe if maybe there is a command to force/reload VoIP profile be visible on firewall rules? Fortigates are operating on profile-based mode
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
@francoma If your policy is in flow mode, try changing it to proxy mode and test.
Regards.
Hi @francoma,
Can you check under System > Feature Visibility and make sure VoIP is enabled.
Regards,
Hi hbac,
Thank you for your time and support, yes, it is enabled in the Feature Visibility on all the fortigates.
Hi @francoma,
Can you please refer to this article for more information "https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-apply-VoIP-profile-to-policy-where-...
Regards,
Minh
Created on 10-25-2023 03:58 PM Edited on 10-25-2023 03:59 PM
Hi @mle2802 ,
Tried and restarted fortigate and no luck, still not seeing profiles on firewall policy even on cli is no option available
@francoma If your policy is in flow mode, try changing it to proxy mode and test.
Regards.
Hi @carlosaleman ,
I changed inspection mode for Firewall policy on CLI, let me test and I'll share with you the results, Thank you so much for your time and support on this.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.