Vlan on multiples internal interfaces

[p0lak13]

Hello !

I need to configure multiple VLAN on my fortigate 60D. I got a problem about this, for example :

Ports internal1, internal2, internal3,internal7 must belong to  vlan 1

Port internal4 must belong to  vlan 490

Port internal6 must belong to vlan 4090

Port internal5 must belong to vlan1, vlan2, vlan 4090, vlan 490

How can I do that ? How can I setup the same vlan on multiples interfaces ?

Thank You :)

[Toshi_Esumi]

You can use software switch described in below doc:

http://docs-legacy.fortin...interfaces.100.05.html

[p0lak13]

It doesn't help me so much :\

For example : I got my internal5 interface which is in vlan1 and in vlan490 and vlan2

For the others it works but not in this case.

I need to replace a Cisco ISA 550W with the Fortigate 60D, but in Cisco interface, I got a tab call vlan, it's simpliest

Another idea ?

[Jeroen]

It is not possible with Fortigate units to use the same VLAN Interface on multiple interfaces. You can create a VLAN's with the same number on different interfaces but with every VLAN his own interface. With non overlapping segments.