Site B is accessing internet through MPLS, the MPLS is directly to the switch without any control, I'm now would like to use a Forti 100D or 200E to do policy control, but after virtual wire pair set, it cannot access to internet.
the virtual wire pair is set to open all service and all source but still cannot go to 22.214.171.124.
I'm also try to use software switch, but after grouped port 3 and port 4, it cannot control by policy and just working like a switch.
Any wrong setting on the virtual wire pair? please help... Many thanks
After below setting, it cannot access to 126.96.36.199
Just a basic setting I applied, below port is down because I put it into other Fortigate device already, the virtual wire pair can working normally if it do not need to go back to other port in the same device.
The tracert result is cannot route to the other port in the same device, actually I tried many cases same as this case, the virtual wire pair cannot go to other port which in the same device.
it is successful after split into two devices, I don't know it is bug or other problem.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.