I got a question about the Virtual IPs. When are we using the interface setting as "Any" ?
Some i used the interface as any. Sometime are not working when I change the static route for the WAN Port.
Thanks,
Ivan
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Are you changing the static route to use a different interface or a different gateway IP?
It is use a difference interface and difference gateway IP. It mapped to 2 WAN interface. How can I apply a Static NAT for both traffic either the user access from A Subnet or B subnet.
For example,
Interfaces
A subnet (/28)--> port 1
B subnet (/30) --> port 2
Virtual IPs
1.1.1.1 /28 --> 192.168.1.x interface : [ port 1 | Any] <--- The interface setting will configure as port 1 or Any ?
Thanks
Ivan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1660 | |
1077 | |
752 | |
443 | |
220 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.