Virtual IPs with Port forwarding cannot crate

[se7en102]

Dear bros,

My company have firewall fortigate 101E and inside comany we have 3 NVR ( CCTV) , so I want to public them to check camera on my phone by WAN .

So i did :

 - Config virtual ips  for eachs NVR go to 1 WAN , different port

NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 

NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044

NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044

Open 3 policy

When i config to use service , rule ok, but not running.

and i did with port forwarding it error  https://www.youtube.com/watch?v=Y9qyBo06meo

how can i fix in this case to public my cctv ?

[fcb]

se7en102 wrote:

Dear bros,

NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 

NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044

NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044

NVR 2 and 3 both have the below - Is that a type-o or what?

WAN (115.79.219.100): port 84, 8044

WAN (115.79.219.100): port 84, 8044  You created these policies with the destination being the VIP/Port forward listed?

[se7en102]

Dear Bros,

my mistake about port , it must be :

NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022  NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044 NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 88, 8088

We have Virtual IPs with filter option services, it not work. no have data transfer.

I was delete them in policy and in Virtual IPs.

- Service was defined like : Name =NVR3, ip =1721.6.1.4 , TCP/88 TCP/8088

- Make new VIPs and only enable Port forwarding TCP 88 and 2nd VIPs for Port 8088

- New policy with disable NAT option , and now it open.

It works for me now.

thank you.