Virtual IP not working

[Jaime_D]

Hi, I' ve have the following configuration in my F60B: Interface WAN1: 82.144.15.178 / 255.255.255.248 Interface INTERNAL: 192.168.1.250 / 255.255.255.0 I have created two Virtual IP: one for a mail and web server (wan1/82.144.15.178 ->192.168.1.248) and other to a second web server (wan1/82.144.15.180->192.168.1.8). There' s a particular fact: the second server is a virtualized one, that is hosted in the first one, sharing the same NIC -bridged mode-. Well, the Fortigate F60B is going to replace a checkpoint safe@office 500. Yesterday I tried to do a " hot" replace (the two boxes were running, the " same" configuration... replace connections...). But I had to get back to the safe@office becouse the virtualizaded web server (192.168.1.8) couldn' t be reached from internet. The other web and mail server were running fine. Web server runs xoops, moodle, and phplist. I wonder if the could be related to the xoops / moodle way to serve pages: they redirect to the url, and perhaps the firewall blocks connections from internal to the external IP... So I hace disconnected the F60B waiting for a solution to my problem... Any suggestion? Thanks in advance, Jaime D

[jasmineelly]

Thanku for share information. 192.168.1.250  is the default Netgear extender IP address used to log in to the extender’s web-based setup page. By accessing the web-based setup page of your Netgear WiFi range extender, you can not only configure it but also change its default settings as per your preferences.

[jasmineelly]

Hii, Hover your mouse cursor over the browser’s address bar and type 192.168.1.250. Do not use the browser’s search bar.

[jasmineelly]

192.168.1.250  is the default Netgear extender IP address used to log in to the extender’s web-based setup page. By accessing the web-based setup page of your Netgear WiFi range extender, you can not only configure it but also change its default settings as per your preferences.