Could you please provide a document or some information related to the following:
How does the HA traffic works when we have deploy the firewall cluster in Active/Standby mode with load balancing using Virtualized clustering in multi VDOM Environment.
For Example ::
Virtual Cluster 1
VDOMA , VDOM B , VDOM C, root
Virtual Cluster 2
VDOM D ,VDOM E , VDOM F
As the IP address is going to be the same , on what basis the traffic load balancing would take place.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Traffic will be load balanced by virtue of which VDOM you attach to each virtual cluster. So in your example all traffic for VDOM D, E and F would be processed by VC2 and the others on VC1. It does not matter what IP addressing you use. It's VDOM-specific.
Traffic will be load balanced by virtue of which VDOM you attach to each virtual cluster. So in your example all traffic for VDOM D, E and F would be processed by VC2 and the others on VC1. It does not matter what IP addressing you use. It's VDOM-specific.
Created on 09-28-2022 06:20 PM Edited on 09-28-2022 06:22 PM
Thank you for the response gfleming.
All traffic to and from a given VDOM is sent to one of the FortiGates where it stays within its VDOM and is only processed by that VDOM
The above statement is understood
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.