Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
douglas1942
New Contributor

VXLAN - different VLANs ?

Hello I want to configure a L2 VLXAN over IPSEC tunnel.

Previously I have had this working with multiple VLANs that entered the Fortigate via tagged sub-interfaces (TRUNK interfaces from my switches).

However, this time, I have a single VLAN environment on both sides (ACCESS switchports connecting to untagged interfaces on my Fortigates), but that single VLAN is tagged differently on both sides e.g. SIDE_A=VLAN 10 & SIDE_B=VLAN 20.

Therefore I need traffic entering SIDE_A Fortigate as VLAN 10 to exit SIDE_B Fortigate as VLAN 20.

Is this possible at all ?

1 REPLY 1
akristof
Staff
Staff

Hello,

 

Thank you for your question. It should be possible. I've never explicitly tested this scenario, but it shouldn't matter that on FGT1 in software switch will be VXLAN+VLAN10 and on FG2 VXLAN+VLAN20.

Adrian
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors