Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
radebebek
New Contributor II

VPN using VPN Manager to create Phase2 local and remote subnet

Normally, if you set up a VPN using VPN Manager in Forti Manager and have "Phase2 per Protected Subnet Pair", it will set the local and remote subnets as 0.0.0.0. I need to have it actually specify the remote and local subnets. I am able to configure this correctly on the FortiGate, but can't replicate the configuration in VPN Manager to easily push it out to other FortiGate's?
What is problem about that?

erokoder
erokoder
1 REPLY 1
Anonymous
Not applicable

Hello radebebek,

 

You can use the following link to create new protected subnet and thereafter you can change edit the VPN settings.

 

https://docs.fortinet.com/document/fortimanager/6.2.2/new-features/522897/vpn-setup-wizard-supports-...

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors