Hi everybody,
I use FortiClient VPN 7.0.2 on my Windows 7 computer. When trying to connect, all seems to be working fine, and no error is displayed in the logs. But I have no Internet access, and no IP address :
Everything works perfectly on a Windows 10 computer with the exact same VPN configuration.
Any idea ?
Thanks !
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 01-09-2022 11:20 AM
Hello plagoutte,
Can you confirm if the SSL VPN web portal does not have any host check feature turned on ?
Can you share the logs for the following?
Run the following command before connecting to the VPN and once you have the command set on the CLI and then try to connect.
Hi Mohit_S
Thank you for your reply !
Yes, I confirm this feature is not enabled.
"diagnose" is not a valid Win 7 command :\
Here is a few more information :
- ~2 minutes after FortiClient indicates "Connected", Windows get a link-local IPv4 address (169.254.X.X)
- Once this link-local address is setup, I manually set a static IP addresse (the one indicated on FortiClient), with no gateway and 255.255.255.255 subnet mask
After applying these manual settings, all is working perfectly... until the next enable of FortiVPN.
Best regards,
PL
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.