VPN does not communicate

[tiagomsantos]

I have a VPN that is in UP status, There is a route to the remote network, and there are firewall rules, but the VPN does not communicate with the remote network. I noticed that the packet arrives at Fortigate and it directs to WAN, when it should direct to VPN. FortiOS 6.2.7

[Toshi_Esumi]

Is the route for the remote network pointing to the tunnel interface in the routing table?

[tiagomsantos]

yes, i already checked the route and the policy

[tiagomsantos]

yes, i already checked the route and the policy

[emnoc]

diag debug flow ?

So many things you need to check but I would start with that and provide phase1/2 details

diag debug vpn ike gateway 

diag vpn tunnel list

and

diag debug reset 

diag debug enable

diag debug flow filter addr x.x.x.x

diag debug flow trace start 10

And put traffic thru towards the tunnel. 

tip: route-based vpn you can pcap on the tunnel phase1-name

diag packet sniffer <tunnel name >

Ken Felix

[StevenTidmore]

What is your Routing table doing? if you go to route lookup is there a policy and routing table entry for the vpn?