VPN client not working after connection

[sc2111]

Hi,

All of a sudden I 've the vpn client that is not working anymore.

It does connect correctly to the remote sites, I tried several, but after that the vpn is not working in that the routes are not added. I also see that the virtual interface is not getting the IP I see in the vpn client application. Seems like it's unable to bind correctly

I Already tried to :

- update to latest version

- remove and reinstall

any help is appreciated

[adambomb1219]

Do you manage the FortiGate this FortiClient is connecting to?  If not this is a question for your IT team.

[sc2111]

THIS is not a question, or problem, for the FirewalL admins.

I’m using the client to connect to SEVERAL customers so it’s impossible that ALL the firewall had issue.

Moreover others are connecting flawlessly 

[adambomb1219]

? So some FortiClient connections to some firewalls work as expected?  And others don't?  Wouldn't this indicate an issue on the firewall since you are using the same FortiClient and PC?

[sc2111]

No, all the connections from my PC  are not working to ANY remote sites.

HOWEVER, connections from a VM inside my pc, with the same vpn client and configuration, is working as expected.

SO the issue is with my pc.

[Olivia_7]

• If your VPN is set up to use the default gateway on the remote network, then you will normally need to VPN to the remote network yourself and re-establish the remote desktop. But you can work around this by adding a static route back to you from the remote PC which should override the VPN default route.
• Configure Virtual Adapter Settings from None to DHCP Lease.
• Check the VPN for Remote Desktop