- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
#VPN Site-To-Site. Issue When Create Multiple Tunnels
I have 3 Site A B C using FortiGate-VM (7.0 & 7.2). Three Site using 3 Ip Public for VPN gateway.
IPsec Tunnel between A <-> B is Up and running.
And I create another Tunnel A <-> C, But the Wizard show "Unable to setup VPN. The rollback process has encountered an error. Orphaned objects may still exist in the configuration database".
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks. I found the problem. Bescause The Firewall policies have reach the maximum entries then the VPN tunnel cannot create more VPN policies.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you tried converting into a custom tunnel and setting it up that way ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes I already setting in custom tunnel same as the first tunnel
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks. I found the problem. Bescause The Firewall policies have reach the maximum entries then the VPN tunnel cannot create more VPN policies.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can workaround that with enabling multiple interface policies from feature visibility to help with your lab.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Pls adv more bcs am also facing this issue and I have created only one policy
