Hi i have a problem to ativate double stack for vpn ssl
config vpn ssl settings set dual-stack-mode enable end
Response in cli mode
set dual-stack-mode enable
To enable dual-stack-mode, all SSL-VPN policies must be configured with IPv4 and IPv6.
node_check_object fail! for dual-stack-mode enable
I have only one vpn policie. do you have an idea ?
Regards
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
where do you pu this argument ?
Hello, when dual-stack is configured on the fortigate and you connect with Forticlient 7.0.7 with "Enable Dual-stack IPv4/IPv6 address". Do you get ONLY an IPv6 address?. Also, once connected. In example, if you have an SSLVPN zone to Internet zone Firewall policy. How does that work? For IPv4 you would need NAT, but for IPv6. You would not need NAT. Can you have one policy for IPv4 (NAT'ing) and different policy for IPv6 not NAT'ing?
config vpn ssl web portal
edit "testportal1"
set prefer-ipv6-dns enable/disable
next
end
Hello, when dual-stack is configured on the fortigate and you connect with Forticlient 7.0.7 with "Enable Dual-stack IPv4/IPv6 address". Do you get ONLY an IPv6 address?. Also, once connected. In example, if you have an SSLVPN zone to Internet zone Firewall policy. How does that work? For IPv4 you would need NAT, but for IPv6. You would not need NAT. Can you have one policy for IPv4 (NAT'ing) and different policy for IPv6 not NAT'ing?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.