VPN IPSEC bytes received 0

[INT1]

it happened after a windows update i think im not sure about it i tried unistalling the updates but its still not working what can be the issue?

[michael2406]

The thing for me was disabling "Fortinet-ESP" in Phase1-Settings of Dial-up vpn. 

[INT1]

@link470, Not really we have just went back to SSL VPN cause it's way better than Ipsec by alot, we were using it before and back to it now, and we haven't ran into any problems like on IPSEC and also we have experienced some problems in couple of countries, the issues couldn't be solved cause there are some requirements that IPSEC needs to work correctly that i think are blocked in that region. 

[luis_pedro_Sato]

For me didnt worked 

[FortiDor]

Hello,

Same problem for me now.

I am working on this topic too :

https://community.fortinet.com/t5/Support-Forum/IPsec-won-t-split-tunnel/td-p/402089

Any update here ?

[michael2406]

For me the solution was to check network adapters from Fortinet in "Device-Manager". There were Fortinet Adapters with #2 or #3 at the end. Delete them, afterwars it started to work. 

[FortiDor]

Hello @michael2406 

Indeed it works !

Is it a bug in the FCT 7.4.3 with the workaround of deleting the both network adapters ? Something in the Release Notes ?