gateway
name: 'Egy-Saudi-VPN'
local-gateway: 41.178.109.139:0 (static)
remote-gateway: 176.44.67.135:0 (static)
dpd-link: off
mode: ike-v1
interface: 'wan1' (5) vrf:0
rx packets: 0 bytes: 0 errors: 0
tx packets: 0 bytes: 0 errors: 1
Site to site vpn tunnel is down
here is tunnel detail s for Fortigate
get vpn ipsec tunnel details
i see that fortigate doesnot do encapsulation on port 4500 (local-gateway: 41.178.109.139:0 (static))
two firewalls connected to ADSL router one is static IP and the other use DDNS
i think there is problem of port fowarding
any help
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Was this tunnel working earlier? Can you share the outputs suggested in below article.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-IPsec-VPNs-tunnels/ta-p/195955
Hi galal2010,
I hope you have enabled Nat T on both the ends?
Please get the below logs by bringing up the tunnel to check where exactly the issue is
# diagnose vpn ike log-filter dst-addr4 x.x.x.x --->replace x.x.x.x with the public IP of the remote site
# diagnose debug application ike -1
# diagnose debug enable
Regards,
Vimala
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.