Hello
I have FotrtiGate100F
I have 3 building in my company each building has connection to MY FortiGate
Building A - connect to port 17 ( I create VLAN 10 for LAN and VLAN 11 for AP )
Building B - connect to port 18 ( I create VLAN 12 for LAN and VLAN 13 for AP)
Building C - connect to port 19 ( I create VLAN 14 for LAN and VLAN 15 for AP)
I need All AP in all Building to take IP Address from same range anyone can help me
thanks for all
best regards.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I have solved this problem
i putted more interface as switch after that i create VLAN for LAN ,AP and Server
Hello @ahmadking22 ,
You can do this with VDOMs. If you create separate VDOM for each building, you can use the same subnet for all buildings.
If I get it right, you want to use a single subnet/VLAN for all the APs in the network for all the buildings. To span the same VLAN on multiple ports of the FGT a hardware switch can be configured. It allows to use the same L2 network through different FGT ports.
Hi Ahmad
If I understand your requirement, you need the same SSID on all APs.
Single SSID = Single Interface = Single range
yes exactly i need like this
So you create a FortiAP profile, add the SSID(s) to this profile, then assign the profile for all your managed APs.
Configure DHCP servers for each VLAN associated with the APs in each building.
Enable the shared-subnet feature for each DHCP server to allow IP address allocation from the same range.
Set up DHCP relay agents for each building to forward DHCP requests to the FortiGate.
https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/486838/dhcp-shared-subnet
Interestingly this many interpretations and suggestions. Yet another one.
I interpreted as [VLAN11+13+15] with one DHCP range.
How about combining all three VLAN interfaces into one software-switch? This can have only one interface/GW IP and subnet, therefore needs only one DHCP range.
Toshi
maybe the most easiest way would be to create a dhcp relay on every vlan that relays to one specific dhcp server that has a pool covering all three vlan so they can get ip from the same nets.
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
I have solved this problem
i putted more interface as switch after that i create VLAN for LAN ,AP and Server
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.