I Have WAN and LAN port.
But I am trying to create vlans under the lan port, see the pictures
The LAN(port2) network is working fine on my vm's. It works also through dhcp server relay.
The ip adresses of my 2 vlans created under the LAN(port2) are not working in my vm's. and they cannot reach my Vm's.
I also created firewall policy from the VLANs to the WAN port, but that doesnt work either
I Am using Hyper-v Environment.
Any Suggestions please?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Port2 is connected to which kind of device?
If it is L2 switch or server or anything else, the port of that device must be configured as trunk allowing VLANs 10 & 16.
Hi AEK,
Its connected to a internal virtual Ethernet from Hyper-V
I will try to configure the trunk, but I dont know if that is possible in the virtual Ethernet
Hello @Nuur ,
You need to create trunk interface on Hyper-V for port2.
And also you need to create every vlan on Hyper-V for vm machines.
Created on 05-10-2024 12:04 PM Edited on 05-10-2024 01:03 PM
I have created the VLAN 16 id in virtual adapter of the Hyper-v
But stil not working.
Not sure if the issue is from Fortigate or Hyper-v
Hello @Nuur ,
Did you create trunk interface for FortiGate.
Also after creatation, you need to chane this vlans and trumk interfaces to your vm's interface.
Hi ozkanaltas,
I am new to the Fortigate. Iam now facing issues that my VM Licence has expired.
normally I do factory reset, then I import the configuration which I backed-up.
But now I cant get passed the License window. I will look for a solution for this.
But for my VLAN Issues
Which interface should be trunked? The physical LAN port on fortigate of vlan16.
Hi Nuur
The screenshot shows that you created VLANs 10 and 16 on FG's port2, so it seems from FG side you did it well.
Now you need to create the same from HyperV side, I mean create tagged VLANs on your HV port and propagate them to your VMs. I can't help on HV since I'm not experienced with it, but I'm pretty sure this doc can help:
I created two VLANs under the LAN port and assigned them specific IP addresses. While the main LAN network continues to operate seamlessly with my VMs, the VMs associated with the VLANs are not receiving the expected IP addresses and are unable to communicate with each other or the WAN. Interestingly, despite configuring part worn tyres uxbridge firewall policies to facilitate traffic from the VLANs to the WAN port.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1677 | |
1085 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.