- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
VIP problem
Friends,
I want to access one of our server using the public IP from out side using http.Port enabled the same for 5555 internal.I created VIP and policy for the same 5555 map to 80 but internally X.X.XX:5555 working.From outside public ip X.X.X.X:5555 not working .Its showing only IIS page showing .Please help.Here am attaching log fyi
ashok kumar
Network Engineer
CCNP/MCSA
- « Previous
- Next »
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
first question: you need to put the VIP into the policy 'wan' -> 'dmz' (or wherever the Citrix server is connected to), source address: 'all', destination address: 'Citrix_VIP' (!). No NAT. Service: 'all' for starters, narrow down later to the service(s) you need.
Basically, it's the same setup as with the webserver VIP, only the VIP definition (the 'mapped to port') differs.
second question: I've got no idea if licensing prevents the server from answering but I would suspect, yes. Contact the server from your LAN (circumventing the VIP, using a different policy) and see if that works.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FWIW
The VIP has no bearing on the application licensing or lack of.
PCNSE
NSE
StrongSwan

- « Previous
- Next »