Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
tanaki
New Contributor II

VIP port forwarding policy problem

Hello,

 

Fortigate 60f v7.2.4   Policy-based NGFW.

 

I am trying to set VIP port forwarding (https://community.fortinet.com/t5/FortiGate/Technical-Tip-Virtual-IP-VIP-port-forwarding-configurati...)  but the VIP object is not listed in Destination ?

 

Any ideas ?

 

Thanks ,

T

1 Solution
sw2090
Honored Contributor

there is also a known bug with vip nt beeing displayedin policy manager when the ipv6 settings are incorrect. FGT and FMG do accept these settings (and do not accept the default Fortinet puts in there when you create a VIP) but the VIP is not displayed  in policy manager afterwards.

This can  be resolved by clearing out the ip v6 addresses in the vip and save it.

Unfortunately there is no switch to completely disable v6 in a vip :(

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

View solution in original post

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
11 REPLIES 11
tanaki
New Contributor II

Because it says it's more advanced mode

AMAK
New Contributor III

Any luck resolving it? I too seem to get this issue.

Top Kudoed Authors