Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
TomerDi1987
New Contributor

VIP and nat

I have 3 WAN interface, I configure VIP Port 80 to internal server:

WAN1(isp1) -> port 80 to 192.168.17.1 port 80

WAN2(isp2) -> port 80 to 192.168.17.1 port 80

WAN3(isp3) -> port 80 to 192.168.17.1 port 80

 

My default route point to  WAN2 (ISP2)

 

When the client go to the server by the VIP I want:

traffic comes from any source to WAN1 will go back to the source from WAN1

traffic comes from any source to WAN2 will go back to the source from WAN2

traffic comes from any source to WAN3 will go back to the source from WAN3

 

any Idea how to do that ?

Is enable NAT on the policy will make sure that traffic will return from the same interface that arrived ?

2 REPLIES 2
Toshi_Esumi
SuperUser
SuperUser

You need three default routes to all of them. As long as routes are there FGT should route return traffic back to where it's initiated.

OneOfUs
New Contributor III

To add on to what Toshi stated, you may want to look at using ECMP:

https://kb.fortinet.com/kb/viewContent.do?externalId=100137

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors