Dears,
What is the best way to connect a TP-Link 1600 VDSL ISP router to a FG90E
I want to use the FG for VPN, DHCP and other policies. the ISP router is providing a nated IP 192.168.0.x
I tried connecting a wire from the router to WAN1 port after disabling DHCP on the router and set a static IP on the WAN port, is this the way to go or I should be doing something else? I read posts saying that I should be changing the connection mode to bridge. what is your recommendation
Thank you in advance
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
In case you may consider to switch TP-Link 1600 VDSL ISP router to bridge mode in order to simplify configuration (i.e. no need to configure port forwarding for VPN).
Hello
What you did should work correctly, but as mentioned by @abarushka bridge mode is better because:
Hello,
In case you may consider to switch TP-Link 1600 VDSL ISP router to bridge mode in order to simplify configuration (i.e. no need to configure port forwarding for VPN).
Hello
What you did should work correctly, but as mentioned by @abarushka bridge mode is better because:
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1519 | |
1019 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.