Are VDOMs supported on all FG devices?
The Fortigate Product Matri makes reference once only in respect of Fortimanager.
Documentation (In my case 7.0.11) refers to such GUI locations as
System > Global
But this is not present on my 40F
I have enabled all switches here
System > Feature Visibility
But no change.
I am logged on as the default admin account in Super_User group.
Is this perhaps a licensing related question?
Thanks for any reply
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
To clarify, by default at least 40F does not have VDOMadmin enabled. You have to use CLI above described in the link @saneeshpv_FTNT provided or @hbac provided, which requires logging off once.
Once you get back in with "multi-vdom" mode, you have GUI to swith the VDOMadmin mode between Split-Task VDOM and Multi VDOM, or disable, like below:
Toshi
Hi @slouw
By default, most FortiGate units support 10 VDOMs, and many FortiGate models support purchasing a license key to increase the maximum number. Exceptions may be with some models and VM which may require license.
"On FortiGate 90 series models and lower, VDOMs can only be enabled using the CLI"
Reference:
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/109991/virtual-domains
Refer to Datasheet of 40F showing Virtual Domain support upto 10.
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf
Best Regards,
Hi @slouw,
VDOMs are supported on all FG devices. To enable multi VDOM mode in the GUI:
1. On the FortiGate, go to System > Settings.
2. In the System Operation Settings section, enable Virtual Domains.
3. Select Multi VDOM for the VDOM mode.
4. Click OK.
To enable multi VDOM mode with the CLI:
config system global
set vdom-mode multi-vdom
end
Please refer to https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/575766/multi-vdom-configura...
Regards,
To clarify, by default at least 40F does not have VDOMadmin enabled. You have to use CLI above described in the link @saneeshpv_FTNT provided or @hbac provided, which requires logging off once.
Once you get back in with "multi-vdom" mode, you have GUI to swith the VDOMadmin mode between Split-Task VDOM and Multi VDOM, or disable, like below:
Toshi
Thanks all for the help.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1735 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.