Hi
I am working with 2 (vdom internet and vdom interno) vdom, i created intervdom routing through the Intervdom link, i have a device conected to Internal VDOM.
When i do a capture packet on the device, i see that source IP of the packet is the IP address of the IVL interface.
Can some know why fortigate change the source IP (I AM NOT DOINT NAT ON THE POLICY), or where can i find information about this behavior?????
Hello
1- The packet capute in my pc conected to the internal VDOM.
2- Between VDOM have /30. I see the IP of the VDON LINK Interface of the internal VDOM.
FortiGate doesn't change the source IP unless you use NAT.
the behavior of using the IP of the Inter-VDOM Link (IVL) interface as the source IP during inter-VDOM routing is typically a fundamental design choice in Fortinet FortiGate devices. This behavior is often intentional and aligned with the concept of maintaining separation and control between Virtual Domains (VDOMs) within the same FortiGate device.
If you have a specific use case or requirement where you need to change this behavior, you should be aware that altering the internal workings of inter-VDOM routing may not be directly supported or recommended by Fortinet.
I found this info.
I don't think so. Please share below in CLI:
- vdom-link interface config on both internet and internal vdom sides.
- set up two admin sessions (hopefully SSH, but you can get in via GUI then open command prompt) and get in each vdom. Then run "diag sniffer packet <vdom-link-internet-vdom-interface>" and "diag sniffer packet <vdom-link-intranal-vdom-interface>" in each session.
Then send some packets from either LAN side or from the internet side(? This wouldn't be possible unless LAN side has public subnet).
Then compare those outputs.
Toshi
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1740 | |
1108 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.