I need to create a VDOM (named it VDOM-A) which will operate in Transparent mode with two interfaces. I want to set all firewall management using Root domain on MGMT with out of band. Is it mandatory to assign an IP address to VDOM-A at any level? In L2 mode, can it operate without assigning any IP to it?
Solved! Go to Solution.
Apparently not possible. This is 7.4.8. You can try it yourself. It wouldn't hurt anything.
FortiGate-70F # c v
FortiGate-70F (vdom) # edit transparent
current vf=transparent:4
FortiGate-70F (transparent) # config sys settings
FortiGate-70F (settings) # set opmode transparent
FortiGate-70F (settings) # show
config system settings
set opmode transparent
end
FortiGate-70F (settings) # end
node_check_object fail! for manageip
Attribute 'manageip' MUST be set.
Command fail. Return code -651
Toshi
Apparently not possible. This is 7.4.8. You can try it yourself. It wouldn't hurt anything.
FortiGate-70F # c v
FortiGate-70F (vdom) # edit transparent
current vf=transparent:4
FortiGate-70F (transparent) # config sys settings
FortiGate-70F (settings) # set opmode transparent
FortiGate-70F (settings) # show
config system settings
set opmode transparent
end
FortiGate-70F (settings) # end
node_check_object fail! for manageip
Attribute 'manageip' MUST be set.
Command fail. Return code -651
Toshi
I believe this IP an be any IP, even dummy unused IP is OK right?
If you don't use it you just need to avoid any conflict with others, I believe.
Toshi
User | Count |
---|---|
2548 | |
1354 | |
795 | |
646 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.