- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Using an external IP for a single internal subnet
Hi,
Looking for some guidance. We are new to Fortinet. Please forgive if I don't word this right. We have a block of external IP's. I want all devices on an internal subnet like 172.16.0.0/16 to use one of those external IP's in a NAT. I then want an internal subnet like 172.17.0.0/16 to use another external IP that we have. Is this possible?
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
This is absolutely possible by using outbound NATing on the outgoing policy.
Please refer to this:
https://community.fortinet.com/t5/Support-Forum/How-to-Create-Inbound-and-Outbound-one-to-one-Static...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
This is absolutely possible by using outbound NATing on the outgoing policy.
Please refer to this:
https://community.fortinet.com/t5/Support-Forum/How-to-Create-Inbound-and-Outbound-one-to-one-Static...