Hi All,
On v5.0 I had policies with Remote Radius users and others without authentication to Access internet, the security mode was not set to captive portal and It worked great. After Upgrading to v5.2.1 policies with radius users are not working but are accessing internet with a regular policy. If I enable security mode to captive portal, regular policy users will be forced to authenticate. How can I make both policy types to work on v5.2.1?
Thanks
Carlos Noel
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Carlos.
Welcome to the forums.
Review the release notes for 5.2.0 (from the firmware section on the support site); there are sections in it that explain the new firewall policy format (including the merged user/device policy subsections) and what steps you take to "fix" your pre 5.0.x config.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.