Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
wmiller
New Contributor

Upgrading Firm on 220b article 20-437-168974-20120426 steps not working

Upgrading Firm on 220b article 20-437-168974-20120426 steps not working Instructions are pretty straight forward. I am using the direct methiod. I can login just fine via CLi ..... I keep getting " Not Found" when trying the command. 192.168.1.3:restore FAP_22B_v4.3.0_b0224_fortinet 192.168.1.3 I have tried with .out as well. Also just incase I tried a space between the : & restore just incase. Thoughts ????
Wesside-KTM 60D-110c-WiFi80cm-300-300a-200a-WiFi60-60-50b-fl400
Wesside-KTM 60D-110c-WiFi80cm-300-300a-200a-WiFi60-60-50b-fl400
3 REPLIES 3
Mike_FTNT
Staff
Staff

The article has typo? - " 192.168.1.3:" should be deleted. Usage: restore <image filename on tftp sever> <tftp sever ip address> ps. You could ping from FAP console to TFTP server , to check connection at first.
wmiller

You were right..... Kudos..... I have a dedicated TFTP IT laptop I use to flash and update almost everything with. Funy thing is it already had a static ip of 192.168.1.3 since thet last time I used it was to update my sencond purchased 220b last year... Same cable, version of TFTP, putty, with a fortinet folder on the desktop pointed to the TFTP server. So I knew all connectivity and configuarion was right. Thank You Again !!!
Wesside-KTM 60D-110c-WiFi80cm-300-300a-200a-WiFi60-60-50b-fl400
Wesside-KTM 60D-110c-WiFi80cm-300-300a-200a-WiFi60-60-50b-fl400
Mike_FTNT
Staff
Staff

You are so welcome! sometimes, the article would be confusing or could have mistakes ...
Labels
Top Kudoed Authors