- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Upgrading 90D from 5.0.9 to 5.2.1
Dear All,
I have FortiWifi 90D currently working version 5.0.9. I am trying to upgrade the firmware to 5.2.1 but not successful. I made hardware test and all passed. Does anybody can advise me? Thank you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What happens when you try to upgrade it? Are you getting any errors?
Please double-check the firmware version you are using to do the upgrade.
If you have a FortiWifi 90D then the firmware should be FWF_90D-v5-build0618-FORTINET.out and not FGT_90D-v5-build0618-FORTINET.out.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Firewall can not be boot up after upgrading the firmware.
I have checked and confirmed that the firmware is FWF_90D-v5-build0618-FORTINET.out not FGT.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Connect a PC to the Console Port and post the output while boting the Fortigate.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have successfully upgraded the firmware. It was taken few more times for normal upgrading. I have to wait over 15 minutes. Thank you for the advise.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Connect a PC to the Console Port, then use a terminal application (eg putty) to capture the output while you boot the Fortigate.
martin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A similar experience, it takes a long time but it works.
//eSalo