Hi guys I upgraded a HA cluster over the weekend of Fortinet 600D firewalls. I was upgrading in three steps as below: Step 1 - Upgrade from 5.4.11 to 5.6.11 Step 2 - Upgrade from 5.6.11 to 6.0.9 Step 3 - Upgrade from 6.0.9 to 6.2.4 The first two steps went very smoothly, but the final step involved a messy reboot after both nodes were upgraded. During the cluster reboot, I lost all connectivity and was contemplating getting remote hands involved. After around 10 minutes, the device thankfully came back online. Is this normal? Should I be wary of using version 6.2.4? Many thanks
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
On saturday, i upg from 6.2.3 to 6.2.4 and i had a lot of problems with DNS after upgrade. My company went down about 2 hours trying troubleshotting the problem without success and we rollback to 6.2.3.
Hi Ziggolina,
I think if you search the forums you will see a number of people complaining about 6.2.4. It doesn't seem to have been Fortinet's finest release- although I know some poeple have found it ok.
I know Mike (aka Fortinet Guru) posts pretty regularly on here. His YouTube channel has quite a good video on the topic:-
Hope that's useful.
Kind Regards,
Andy.
I am using 6.2.4 and have few problems
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.