Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
emoralesa
New Contributor

Unlock mac address

Hello

As Can I unlock a mac address?

I blocked a mac address and I'm looking to unlock

Thank you very much

 

1 Solution
Dave_Hall
Honored Contributor

From the CLI, type the following:

config system global
set gui-dhcp-advanced enable
end

 

Then check the Interface page again.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

View solution in original post

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
8 REPLIES 8
Dave_Hall
Honored Contributor

On later firmwares(5.0 and up), the DHCP server settings have been moved to a sub-section under Interfaces/<interface>.  You should be able to locate the MAC Address there, right-click on it to edit/delete it.

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
emoralesa

Hi

I have a fortigate 60D and i don't have the option to change or to delete mac address What other option do I have? Thank you very much

 

Adrian_Buckley_FTNT

What firmware version are you using?

emoralesa

I have version v5.2.1

 

Dave_Hall
Honored Contributor

@Eduardo

 

Wish your screenshots would include more of the page so we can see what section of the GUI you are on.  Just loaded 5.2.2 firmware on a test unit -- from what I can tell, the DHCP server option is still there -- outlined in red in my screenshot -- the section you are showing in your screenshot is outlined in blue (in mine).

 

 

If you do not see the DHCP server section, try using a different web browser.

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
emoralesa

Sorry This is the full screen. I used another browser and do not see the option of DHCP. Thank you very much for you support

Dave_Hall
Honored Contributor

From the CLI, type the following:

config system global
set gui-dhcp-advanced enable
end

 

Then check the Interface page again.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
emoralesa

Thank you very much. I can see the dhcp advanced menu. I appreciate your help

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors