Hi,
From the dashboard (Fortinet C100) I saw unknown IP Address that I don't have on my network. I want to know who it is ? or what device it is? can any one tell me how?
thx,
Joe
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
You can probably jump into the CLI and run a #get system arp
That may show you the MAC address of the device. It may be a device that has two IPs which you can then track down. Also you can try turning on device discovery on the interface where the IP originates from. This will only work if the firewall is the Layer 3 gateway for that network. You can do this from the CLI, only change the port1 to your interface:
config system interface
edit port1
set device-identification enable
end
You can also enable that in the GUI using Network -> Interfaces -> port1
Now check the box for device identifcation and hit apply
You should be able to browse to user & Device -> Device Inventory (in version 5.4) to view what the firewall has found.
I hope that helps.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1731 | |
1099 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.