Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ergotherego
Contributor II

Unable to set 'management-ip' on interface - FGT600E 6.2.3

I have a FGT 200D running 6.0 and have used the 'set management-ip' command there to specify a local (non-syncd) IP address so that each unit in the cluster can be directly managed/monitored.

 

Just got a new FGT 600E and am unable to apply the same command. It's not showing up in full output as an option, or using command completion. Checking the CLI reference log it shows as valid command for 6.2.

 

https://docs.fortinet.com/document/fortigate/6.2.6/cli-reference/10620/system-interface

 

Is there a pre-req before I can apply this command 6.2?

1 Solution
ergotherego
Contributor II

Figured it out. That command only works when HA is configured.

View solution in original post

1 REPLY 1
ergotherego
Contributor II

Figured it out. That command only works when HA is configured.

Labels
Top Kudoed Authors