- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unable to receive SSL VPN tunnel IP address (-30)
I have multiple users that are getting this error message intermittently. The users are connecting from India and my office is located in the U.S. There are plenty of IP addresses available in the pool. Could this be a internet bandwidth issue? Any suggestions would be greatly appreciated.
Thank you,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I high unlikely, how big is the pool? Are all users using the same pool or do you have multiple portal with unique defined pools for tunnel-mode
i.e
web portal USusers
pool ABC
web portal INusers
pool DEF
etc....
Ken
PCNSE
NSE
StrongSwan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
One portal 20 addresses 4 users.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Than your problem is not the pool size. Your problem is something else.
PCNSE
NSE
StrongSwan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
just a wild guess: latency? maybe the time between request and reaction of the FGT is too long (though I have no information on this internal detail).
OTOH, have you checked the MTU? this can bring up a lot of funny effects like some traffic making it through and some not.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Good call, I'll look into that and report back.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
did you managed to understand why do you have this issue?
I start experience the same issue. It happens randomly. I'm sure that is not related to the IP Pool usage. I have a pool of 200 IPs and when the issue happen only 94 users were logged in.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Anyone with a solution for this issue? I am intermittently getting the error as well. There are currently no users connected, but when testing the error "unable to receive ssl vpn tunnel ip address (-30)" comes up.
Help?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am having the same problem. Has anyone found a solution yet?
Issue is the same, tested from different locations and ISP's
Can it be a firmware issue? I have v5.6.2 build1486 on a 30E
Firewall is connected to ISP's firewall, is it the same in your case?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
When I faced the issue the firewall was in 5.2.4, last week I upgrade the firewall to 5.4.5. For now the issue seems to be gone.
