Unable to connect with browser

[SaschaH]

Hello,

i bought a FortiGate 30D, but can not access it with the browser (LAN4, standard setting). It works fine with Fortiexplorer and HTTPS/HTTP is enabled.

Is there some setting for access with the browser?

Regards

[Boosted]

Did you set your Ipv4 settings to the network of the Fortigate?

[SaschaH]

Yes, i used DHCP and i can send a ping to the address of the FG.

Strange thing is, i can telnet to port 443 and get connected, but with my IE it says there is no webserver answering.

[gschmitt]

You can connect to it via FortiExplorer? Is the interface you are connected to set for Access HTTTPS?

Can you do a Firmware Update/Downgrade?

[ede_pfau]

Try Firefox, works 99.9% of the time. Might be a IE quirk.

Using HTTPS, you will have to confirm the certificate warning as the default cert is not host-specific.

If you don't get a cert warning then the HTTPS port might be relocated (i.e. not 443).