Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jnfelix
New Contributor II

Unable to add FortiAP to Fortigate Wireless Controller

Hi everyone,

Im trying to manage new APs with Fortigate Wireless Controller, but without success.


Firstly I enable CAPWAP and DHCP Server on Fortigate interface

(Fortigate <-> FortiSwitchPOE <-> FortiAPs)

Fortigate: v6.0.8 build0303 (GA)

FortiAP-U231F
FortiAP-23JF


I made a packet capture on Fortigate Interface and i have CAPWAP Discovery Requests from FortiAPs to Fortigate.

On 

config wireless-controller wtp-profile 

 I cannot see those AP models.

What should i do? 

1 Solution
ConnyGustavsson
New Contributor III

Hi. U231F is not compatible with FortiOS 6.0.8 ,you need version 6.4.3 in the Fortigate or newer. 
https://docs.fortinet.com/document/fortiap/6.4.8/fortiap-and-fortios-compatibility-matrix/798184/for...

BR/Conny

cogus

View solution in original post

cogus
5 REPLIES 5
dgabor
Staff
Staff

Hi jnfelix,

 

if you are using a mgmt vlan to connect APs make sure capwap is enabled on it as well.

jnfelix
New Contributor II

thanks for reply dgabor.

i also tried that without success.

ConnyGustavsson
New Contributor III

Hi. U231F is not compatible with FortiOS 6.0.8 ,you need version 6.4.3 in the Fortigate or newer. 
https://docs.fortinet.com/document/fortiap/6.4.8/fortiap-and-fortios-compatibility-matrix/798184/for...

BR/Conny

cogus
cogus
jnfelix

Thanks for the info ConnyGustavsson.
I didn't check that matrix before.

Do you suggest the upgrade or FortiLAN Cloud do a good job? 

ConnyGustavsson

if your FG support 6.4 and there is no obvious reason to stay on 6.0; upgrade to 6.4.7 (Check upgrade path)  //C

cogus
cogus
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors