I just upgraded my FG 100F from 7.2.3 to 7.2.7 using the recommended upgrade path (7.2.3 - 7.2.5 - 7.2.7). After upgrade, all FAP 221e stopped working. Wireless network is down. Wired network works though.
So with the upgrade, I am now unable to access the web gui. I can only access it thru ssh. I was not able to troubleshoot why my wireless network is down so I downgraded back to 7.2.3 then restored the backup. After restore, wireless is now back and working.
But web gui access is still "refused to connect". Prior to upgrade, I am able to access it with https://ipv4:8443.
I tried all troubleshooting guides I found but I can't get it to work.
Here's some that might help:
config system global set admin-sport 8443 set admintimeout 10 set alias "FortiGate-100F" set auth-cert "Fortinet_GUI_Server" set autorun-log-fsck enable set gui-certificates enable set gui-fortigate-cloud-sandbox enable set gui-theme onyx set gui-wireless-opensecurity enable set hostname "HMHO" set management-port-use-admin-sport disable set switch-controller enable set timezone 38 end config system interface edit "lan" set vdom "root" set ip 192.168.0.1 255.255.255.0 set allowaccess ping https ssh snmp http fgfm fabric set type hard-switch set alias "LAN" set stp enable set device-identification enable set role lan set snmp-index 11 config ipv6 set ip6-address ::ffff:192.168.0.1/128 end next end
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Can you make sure admin-server-cert is configured as below and check?
# config sys global
set admin-server-cert Fortinet_Factory
end
if this is already configured, please try the debugs mentioned in below article.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-GUI-is-not-reachable-after-upgrade/ta-p/19...
Regarding FAP outage, try upgrade your FAP to 7.2.3.
In case the issue persists, you may try set the below to allow backward compatible ciphers.
config wireless-controller global
set tunnel-mode compatible
end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1634 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.