Hello Everyone,
I have created security profiles ( webfiltering & app control). However, I am not able to enable it in the policy, I switch the enable button but OK button becomes inactive.
I might be missing something but I am new to this device, your priceless assistance will be highly appreciated.
Professional Services Engineer
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Check your inspection mode under Dashboard|System Information|Inspection Mode (5.4.0 GUI) not sure if it's the same for 5.4.1.
If your in proxy and the security profile is set for flow-based you won't be able to select it for new IPv4 Policy's.
Found that out recently just passing it along.
-Stephen
Do you mean you can't enable the security policy, or you can't set a particular security profile (like web filtering or app control) on a policy?
In 5.4.x you can actually set flow-mode security profiles on a security policy, but not from the GUI. You need to set them in the CLI. On a 5.4.2 FortiGate set to proxy mode I have multiple security policies with flow-mode profiles. Note that app control profiles are *always* flow-mode, but web filter profiles can be proxy mode or flow mode.
This has been discussed a bit on the forums. See https://forum.fortinet.com/tm.aspx?m=135666.
There are some limitations and caveats, which the thread above discusses.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.