Unable to Access WEB GUI after Trusted Hosts

[40User]

I screwed up!! I was messing up with the trusted hosts settings and accidentally " locked myself out" of the web gui. internally and Externally!! What is the best way to get the access back!! HELP!!!

[matchan]

do you have physical access to the box? if so, then serial cable, if not you might be in trouble. Matt

[40User]

Well I don' t have physical access but will have it tomorrow morning. Good thing is that i was not doing nay updates/upgrades so the config/network is fine but I do need to get in...What is the CLI COMMAND and method to allow me to get back in?! thx

[matchan]

after you' re connected by serial. config sys admin edit <admin name> set trusthost1 <ipsubnet>/<subnetmask> end note you can use trusthost1, trusthost2 or trusthost3. Cheers Matt

[rwpatterson]

In the future, have access to a second account (support, etc) so that you can avoid the serial route.... Works for me.

[40User]

thanks guys... The issue was fixed... I had my corp office as one of the trusted hosts...so as soon I went to work, i was able to access the branch firewall.. Taught me a lesson not to mess with the trusted hosts settings!!!