I'd like to create a firewall rules/policies based on URL not the IP.
Example:
- DMZ or LAN Server-one can access only abcdefg.com
- DMZ or Server-two can access only gfedcba.com
Thank you,
T
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello Trbonja,
You will have to create an FQDN address and apply that address in your firewall policy.
GoodLuck.
Thank you!
T
Hello @Trbonja,
To create firewall rules or policies based on URLs rather than IP addresses. You need to generate a FQDN address and then incorporate it into your firewall policy.
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/217973/using-wildcard-fqdn-a...
Thanks
Pavan
Hi @Trbonja,
To allow the traffic you need to create a Firewall policy.
Within the Firewall policy you can create FQDN object with specific URL as per your requirement.
Ensure do define right source and destination in the order of preference for the policy hits.
This should work.
Thanks,
Kruthi
Hi,
For creating policies for destination URLS, you may create FQDN and use the FQDN on the policy. You may refer to this link for the asme:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-wildcard-FQDN/ta-p/196118
BR,
Manosh
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.