- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
URL in firewall rules
I'd like to create a firewall rules/policies based on URL not the IP.
Example:
- DMZ or LAN Server-one can access only abcdefg.com
- DMZ or Server-two can access only gfedcba.com
Thank you,
T
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Trbonja,
You will have to create an FQDN address and apply that address in your firewall policy.
GoodLuck.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you!
T
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @Trbonja,
To create firewall rules or policies based on URLs rather than IP addresses. You need to generate a FQDN address and then incorporate it into your firewall policy.
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/217973/using-wildcard-fqdn-a...
Thanks
Pavan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Trbonja,
To allow the traffic you need to create a Firewall policy.
Within the Firewall policy you can create FQDN object with specific URL as per your requirement.
Ensure do define right source and destination in the order of preference for the policy hits.
This should work.
Thanks,
Kruthi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
For creating policies for destination URLS, you may create FQDN and use the FQDN on the policy. You may refer to this link for the asme:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-wildcard-FQDN/ta-p/196118
BR,
Manosh