Hi !!
I am new to fortigate, and I have the following situation:
Internal web Server with address:
I´ve created a VIP that forwards to port 80 and then I´ve created a Policy to allow incoming traffic.
This works, but the shows me the http://server1
How can I create redirections so I can go straight to http://server1/Dir1 and Dir2 please?
Thanks,
Marcos
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Firewall is doing translation of destination ip and/or destination port in the packet when using vip. Firewall will not modify http parameters normally.
So this needs to configured in the server, not in firewall.
Hi!
I understand, but my obsolete TMG does this redirection, I cannot believe that fortigate doesn´t.
Thanks,
Keep in mind that most/if not all web servers software support redirects.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1713 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.