UDP Packets Forwarding

[Musaab]

Dear All, We are running an Application which works on UDP Packets and using the Port 8122 and 8123. We have FG-1000 and it is running in NAT mode, now we need to forward these UDP Packets to different Segments. In Cisco IOS, we perform the said task by using the following commands: # ip helper-address command (this will accept a broadcast request for a UDP service and then forward it as a unicast to a specific IP address) # ip forward-protocol command ( this will allow to forward any UDP port) As we need to need to perform the said task in the Fortigate but we didn' t find any support in FortiOS. Kindly let us know how to forward UDP Packets in FortiOS. Thanks & Regards, Musaab

[jruiz]

Hi, did you ever got a response from fortinet in this case? . Thanks.