Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Hanselix
New Contributor

Two firewall policy, one working one is not working

Hello,

I have a situation on a fortigate 100 E.

I have two policies in place, to permit communications between two vlans:

The policy wich permit communication between Production Lan to Vlan 102 is working, from 10.10.0.x i can access anything on 10.10.2.x

But the reverse policy is not working. I cannot access anything from 10.10.2.x to 10.10.0.x

My settings are in the picture below

The working policy

working policyworking policy

Not working policy

 

not working policynot working policy

With anticipated thanks for pointing me in the right direction,

Hans

2 Solutions
sthampi_FTNT
Staff
Staff

Hi Hanselix,

 

Packet sniffer, flow debug and a session dump will provide the possible cause for this traffic failure in the return direction. The commands are available in the following KB article. 

 

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connecti...

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Using-the-FortiOS-built-in-packet-sn... 

Could you please run the flow debug and packet sniffer to identify why the traffic is blocked?

View solution in original post

Hanselix
New Contributor

Hello,

Thank you for your valuable input. With debug flow, i saw that we have a policy route (made by the ex-it guy), which forward all traffic from this vlan to other internet connection.

For now we will leave it this way, until we phisically separate the newtworks near future

Thank you,

H

View solution in original post

2 REPLIES 2
sthampi_FTNT
Staff
Staff

Hi Hanselix,

 

Packet sniffer, flow debug and a session dump will provide the possible cause for this traffic failure in the return direction. The commands are available in the following KB article. 

 

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connecti...

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Using-the-FortiOS-built-in-packet-sn... 

Could you please run the flow debug and packet sniffer to identify why the traffic is blocked?

Hanselix
New Contributor

Hello,

Thank you for your valuable input. With debug flow, i saw that we have a policy route (made by the ex-it guy), which forward all traffic from this vlan to other internet connection.

For now we will leave it this way, until we phisically separate the newtworks near future

Thank you,

H

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors