- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
::Two Segments Internal and AP Wifi::
Greetings,
I have an issue in related working with two segments.
Scenario:
I created two separated(by port) segments one is 192.168.0.1/24 for Internal use combine with DHCP server at that range on Port 1
Second segment with 10.0.0.1/24 which connects directly to Ubiquity AP, users is able to connected via mobile/laptop on Port 4
DHCP is enable for that port range between x.x.x.2~30.
My issue is that I need to manage that AP only on the address 10.0.0.1 via ssh or browser and I am not able to 'see' that network because I am on the 192.168.0.1/24 segment. Also it is important that WiFi users will NOT have access to the internal address.
I wanted to note that everything is working well, just I don't have the ability to manage that AP. attached my layout file
p.s. the AP is supporting vlan.
regards,
Kpax
Thanks in advance,
Kpax