Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
awaiskhan31
New Contributor

Two Fortinet Firewalls over ubnt wireless link

Hi,

    I have two Fortinet firewalls connected via a UBNT P2P Wireless link, I just want to communicate between two sites.

One firewall is in Head office and other is in Branch Office. Branch office firewall suppose to get a internet from HO firewall and to access LAN network too. Which configuration do i have to make on both firewalls?

HO Network: 192.168.0.1/24

Branch Office Network: 20.10.0.1/24

3 REPLIES 3
mahesh_secure
Contributor

Hi

 

On branch Firewall

connect UBNT P2P Wireless link to branch firewall wan1(or any free port) port and set ip 10.10.10.2/24

and create a default static route to 0.0.0.0/0.0.0.0 with interface wan1 and gateway 10.10.10.1

create policy from internal interface to wan1 interface without NAT.

 

On HO Firewall

 

connect UBNT P2P Wireless link to wan1 (or any free port)port and set ip address 10.10.10.1/24

and create a route with destination 20.10.0.0/24 device as wan1 and gateway as 10.10.10.2

create 2 policy from wan1 to your internet connected interface with NAT and to lan interface without NAT

 

Thanks and Regards

Mahesh

ede_pfau
Esteemed Contributor III

Branch firewall gateway should be 10.10.10.1 - the other hop.


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
mahesh_secure

yapz.... type mistake

 

 

 

 

Mahesh

Top Kudoed Authors