Trunk and Access VLAN

[ciscoasa]

Hello,

I've a FGT100D and wanna configure it like a Cisco switch.

1、Port 1：switchport access vlan 10

2、Port [11-14]：switchport mode trunk, channel-group 1 mode on

3、Interface Vlan10, ip address 192.168.10.254/24

How to configure FGT100D to solve this issue ?

Thanks for your response.

[laf]

I am not sure that Fortigate allows for trunk mode switch operation; this is what I am searching right now.

Any thoughts?

[EMES · Accepted solution]

Create a hardware switch and add those ports, then create a vlan interface under that hardware switch.