Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lokewing
New Contributor

Trunk Port and access Port

Hi All,

 

Below is my planning for my network structure, Currently i using fortigate 100d with firmware v5.2.2,build642 (GA), refer to my attach file, after i created the trunk port for my wireless access point for broadcast multiple SSID with different VLAN,  i unable to create other ports to access port, any one can guide me how to do this configuration?  

4 REPLIES 4
lokewing
New Contributor

Forgotten attach my currently config screen shot

 

iJake
Contributor

They won't have any VLAN tags by default, you probably want to create a switch with those ports which can by done by Create New > Interface and then select switch as the "Type" and then select those ports as members.

......

-Jake

emnoc
Esteemed Contributor III

Qs;

 

Does the  4x AP support 802.1q

 

Are you expecting to run each APs with the same SSID ( multiple SSIDs )

 

PCNSE 

NSE 

StrongSwan  

lokewing
New Contributor

Hi Emnoc,

 

Yes, i want each APs broadcast multiple SSID, but i dont know how to configure trunk port and access port in fortigate, in this environment don't have any management switch.